EyeRIS Pro Wired HID mode: On shut down of the system touch does not function

Step1: EyeRIS pro is connected to a system on wired HID mode

Step2: After using the wired HID, you shutdown the system.

Step3: Turn on the system, remove the wired connection from the system and then again reconnect.

Ste4: Touch is now active

Related Articles
EyeRIS Pro- Quick Start Guide (QSG)
EyeRIS Pro Installation Guide
Can user connect and control their PC/Laptop/Macbook to EyeRIS PRO, Galileo & Thinker? Does it need Driver or its Plug n Play?
Yes, users can connect their Windows PC/ Laptop & Macs to Galileo, EyeRIS PRO & AirMind Thinker There are 2 ways to achieve this. Wired: Using micro USB to USB-type A cable provided in the box. This is plug-n-play and does not need any driver. ...
EyeRIS ONE
Windows Software: https://cybernetyx.com/download/EyeRIS_Stylus_16B_Panel_1.4.118_20210723_cnx.msi Change Log: Added support for monitors/television with reflective bezel. Added user notification when detected display frequency is not conducive to ...
Multi pointer function are not working (Eyeris IX) for Windows 10.
Exit EyeRIS application from task bar. Extract this zip Open Command prompt as ADMIN. (very important) Go to this extracted folder location by typing command “cd and drag this folder in command prompt”. Type uninstall_driver.bat Press enter this ...
EyeRIS ONE -Quick Start Guide- (QSG)
EyeRIS ONE- Installation Guide EyeRIS ONE- Clip-On Interactive Device for DisplaysEyeRIS One QSG

Related Articles